Pseudo-beam method for compressive buckling characteristics analysis of space inflatable load-carrying structures This paper extends {it A. Le van}’s work et al. [“Finite element formulation for inflatable beams”, Thin-Walled Struct. 45, No. 2, 221--236 (2007; url{doi:10.1016/j.tws.2007.01.015})] to the case of nonlinear problem and the complicated configuration. The wrinkling stress distribution and the pressure effects are also included in our analysis. Pseudo-beam method is presented based on the inflatable beam theory to model the inflatable structures as a set of inflatable beam elements with a pre-stressed state. In this method, the discretized nonlinear equations are given based upon the virtual work principle with a 3-node Timoshenko’s beam model. Finite element simulation is performed by using a 3-node BEAM189 element incorporating ANSYS nonlinear program. The pressure effect is equivalent included in our method by modifying beam element cross-section parameters related to pressure. A benchmark example, the bending case of an inflatable cantilever beam, is performed to verify the accuracy of our proposed method. The comparisons reveal that the numerical results obtained with our method are close to open published analytical and membrane finite element results. The method is then used to evaluate the whole buckling and the load-carrying characteristics of an inflatable support frame subjected to a compression force. The wrinkling stress and region characteristics are also shown in the end. This method gives better convergence characteristics, and requires much less computation time. It is very effective to deal with the whole load-carrying ability analytical problems for large scale inflatable structures with complex configuration.

References in zbMATH (referenced in 49 articles )

Showing results 21 to 40 of 49.
Sorted by year (citations)
  1. Nachbagauer, Karin; Gruber, Peter; Gerstmayr, Johannes: A 3D shear deformable finite element based on the absolute nodal coordinate formulation (2013)
  2. Liu, Cheng; Tian, Qiang; Hu, Haiyan; García-Vallejo, Daniel: Simple formulations of imposing moments and evaluating joint reaction forces for rigid-flexible multibody systems (2012)
  3. Pi, Ting; Zhang, Yunqing; Chen, Liping: First order sensitivity analysis of flexible multibody systems using absolute nodal coordinate formulation (2012)
  4. Mohamed, Abdel-Nasser A.; Shabana, Ahmed A.: A nonlinear visco-elastic constitutive model for large rotation finite element formulations (2011)
  5. Sanborn, Graham G.; Choi, Juhwan; Choi, Jin Hwan: Curve-induced distortion of polynomial space curves, flat-mapped extension modeling, and their impact on ANCF thin-plate finite elements (2011)
  6. Tian, Qiang; Liu, Cheng; Machado, Margarida; Flores, Paulo: A new model for dry and lubricated cylindrical joints with clearance in spatial flexible multibody systems (2011)
  7. Bhalerao, Kishor D.; Anderson, Kurt S.: Modeling intermittent contact for flexible multibody systems (2010)
  8. Mohamed, Abdel-Nasser A.; Brown, Michael A.; Shabana, Ahmed A.: Study of the ligament tension and cross-section deformation using nonlinear finite element/multibody system algorithms (2010)
  9. Weed, David; Maqueda, Luis G.; Brown, Michael A.; Hussein, Bassam A.; Shabana, Ahmed A.: A new nonlinear multibody/finite element formulation for knee joint ligaments (2010)
  10. Dmitrochenko, Oleg; Mikkola, Aki: A formal procedure and invariants of a transition from conventional finite elements to the absolute nodal coordinate formulation (2009)
  11. He, Jin; Lilley, Carmen M.: The finite element absolute nodal coordinate formulation incorporated with surface stress effect to model elastic bending nanowires in large deformation (2009)
  12. Hussein, Bassam A.; Weed, David; Shabana, Ahmed A.: Clamped end conditions and cross-section deformation in the finite element absolute nodal coordinate formulation (2009)
  13. Maqueda, Luis G.; Shabana, Ahmed A.: Numerical investigation of the slope discontinuities in large deformation finite element formulations (2009)
  14. Romero, Ignacio; Arribas, Juan J.: A simple method to impose rotations and concentrated moments on ANC beams (2009)
  15. Wang, Changguo; Tan, Huifeng; Du, Xingwen: Pseudo-beam method for compressive buckling characteristics analysis of space inflatable load-carrying structures (2009)
  16. García-Vallejo, D.; Mayo, J.; Escalona, J. L.; Domínguez, J.: Three-dimensional formulation of rigid-flexible multibody systems with flexible beam elements (2008)
  17. Gerstmayr, J.; Ambrósio, J. A. C.: Component mode synthesis with constant mass and stiffness matrices applied to flexible multibody systems (2008)
  18. Gerstmayr, Johannes; Matikainen, Marko K.; Mikkola, Aki M.: A geometrically exact beam element based on the absolute nodal coordinate formulation (2008)
  19. Lee, Soo-Ho; Park, Tae-Won; Seo, Jong-Hwi; Yoon, Ji-Won; Jun, Kab-Jin: The development of a sliding joint for very flexible multibody dynamics using absolute nodal coordinate formulation (2008)
  20. Maqueda, Luis G.; Bauchau, Olivier A.; Shabana, Ahmed A.: Effect of the centrifugal forces on the finite element eigenvalue solution of a rotating blade: a comparative study (2008)