GAMBIT is Fluent’s geometry and mesh generation software. GAMBIT’s single interface for geometry creation and meshing brings together most of Fluent’s preprocessing technologies in one environment. Advanced tools for journaling let you edit and conveniently replay model building sessions for parametric studies. GAMBIT’s combination of CAD interoperability, geometry cleanup, decomposition and meshing tools results in one of the easiest, fastest, and most straightforward preprocessing paths from CAD to quality CFD meshes.

References in zbMATH (referenced in 28 articles )

Showing results 1 to 20 of 28.
Sorted by year (citations)

1 2 next

  1. Kumar, Rakesh; Chinnappan, Arun Kumar: Development of a multi-species, parallel, 3D direct simulation Monte-Carlo solver for rarefied gas flows (2017)
  2. Zhou, B. Z.; Wu, G. X.: Resonance of a tension leg platform exited by third-harmonic force in nonlinear regular waves (2015)
  3. Betchen, Lee J.; Straatman, Anthony G.: Entropy generation-based computational geometry optimization of the pore structure of high-conductivity graphite foams for use in enhanced heat transfer devices (2014)
  4. Shyam Sundar, D.; Yeo, K. S.: A high order meshless method with compact support (2014)
  5. Fernández Oro, J. M.; Pereiras García, B.; González, J.; Argüelles Díaz, K. M.; Velarde-Suárez, S.: Numerical methodology for the assessment of relative and absolute deterministic flow structures in the analysis of impeller-tongue interactions for centrifugal fans (2013) ioport
  6. Hussein, Ashraf S.; El-Shishiny, Hisham E.: Modeling and simulation of micro-scale wind farms using high performance computing (2012)
  7. Sui, Y.; Teo, C. J.; Lee, P. S.: Direct numerical simulation of fluid flow and heat transfer in periodic wavy channels with rectangular cross-sections (2012)
  8. Aydin, Ozer; Unal, Rahmi: Experimental and numerical modeling of the gas atomization nozzle for gas flow behavior (2011)
  9. Genç, M. Serdar; Kaynak, Ünver; Yapici, Hüseyin: Performance of transition model for predicting low (Re) aerofoil flows without/with single and simultaneous blowing and suction (2011)
  10. Khor, C. Y.; Abdullah, M. Z.; Abdullah, M. K.; Mujeebu, M. A.; Ramdan, D.; Majid, M. F. M. A.; Ariff, Z. M.; Rahman, M. R. Abdul: Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process (2011)
  11. La Torre, F.; Kenjereš, S.; Moerel, J.-L.; Kleijn, C. R.: Hybrid simulations of rarefied supersonic gas flows in micro-nozzles (2011)
  12. Aydin, Ozer; Boke, Y. Erhan: Experimental and numerical modeling of the effect of solid surface on (NO_x) emission in the combustion chamber of a water heater (2010)
  13. Betchen, Lee J.; Straatman, Anthony G.: An accurate gradient and Hessian reconstruction method for cell-centered finite volume discretizations on general unstructured grids (2010)
  14. Ghosh, S.; Pratihar, D. K.; Maiti, B.; Das, P. K.: An evolutionary optimization of diffuser shapes based on CFD simulations (2010)
  15. Kim, Sung-Min; Mudawar, Issam: Analytical heat diffusion models for heat sinks with circular micro-channels (2010)
  16. Kim, Sung-Min; Mudawar, Issam: Analytical heat diffusion models for different micro-channel heat sink cross-sectional geometries (2010)
  17. Giessler, C.; Thess, A.: Numerical simulation of electromagnetically controlled thermal convection of glass melt in a crucible (2009)
  18. Glatzel, Thomas; Litterst, Christian; Cupelli, Claudio; Lindemann, Timo; Moosmann, Christian; Niekrawietz, Remigius; Streule, Wolfgang; Zengerle, Roland; Koltay, Peter: Computational fluid dynamics (CFD) software tools for microfluidic applications - a case study (2008)
  19. Kim, Yong Hyun; Vandevord, Pamela J.; Lee, Joon Sang: Multiphase non-Newtonian effects on pulsatile hemodynamics in a coronary artery (2008)
  20. Sung, Myung Ki; Mudawar, Issam: Effects of jet pattern on single-phase cooling performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme (2008)

1 2 next